| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anybody seen or used one of these? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=6158 |
Page 1 of 1 |
| Author: | Jimmie D [ Fri Apr 14, 2006 9:32 am ] |
| Post subject: | |
http://cgi.ebay.com/Bolt-on-Neck-Kit-from-Luthiers-CoolTools _W0QQitemZ7405624057QQcategoryZ47067QQrdZ1QQcmdZViewItem |
|
| Author: | Andy Zimmerman [ Fri Apr 14, 2006 10:25 am ] |
| Post subject: | |
yes This was the subject of a thread a few weeks ago. A few people bought them, but I haven't heard about anyone using one yet. Some felt it was too expensive. |
|
| Author: | Don Williams [ Fri Apr 14, 2006 10:45 am ] |
| Post subject: | |
That's a lot of cash for two pieces of aluminum and a couple helicoils. Not sure what advantages it has, if any. |
|
| Author: | A Peebels [ Fri Apr 14, 2006 12:41 pm ] |
| Post subject: | |
About $2.00 in material, and 1/4 hour labor. Price seems a little high. Al |
|
| Author: | Jimmie D [ Fri Apr 14, 2006 12:54 pm ] |
| Post subject: | |
I must have missed that thread. I was just curious to see if anyone had used this. Sounds like a reasonable idea. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|